SPEED NUT CC HCP

Application

In particular useful for installation in vertical channels or places of difficult access.

Further advantages:

     - For all Channels of type 41, independent of the channel height.

     - No getting stuck on bolt heads when sliding in the channel.

     - No appearance of settlement after tightening.

 

Scope of delivery

Channel Nut and Spring are tightely connected.

 

Installation

After inserting the Speed Nut into the channel opening, it is turned to the right as far as it will go by exerting slight pressure on it; deinstallation may be effected by following the instructions on the reverse order.

Installation and deinstallation do not require tools and may be repeated several times.

 

Technical Data

 M6M8M10M12
Tightening torque 8.8 1) [Nm] 10 25 40 80


1) Using lower steel classes, the value are to be reduced accordingly.

Channel
thickness
[mm]
M6
FZ ≤
[kN]
M8
FZ ≤
[kN]
M10
FZ ≤
[kN]
M12
FZ ≤
[kN]
 M6
FQ ≤
[kN]
M8
FQ ≤
[kN]
M10
FQ ≤
[kN]
M12
FQ ≤
[kN]
1.5 3.2 4.7 4.7 7.5   0.7 1.8 2.9 7.5
2.0 3.2 5.8 5.8 10   0.9 2.1 3.4 9
2.5 3.2 5.8 5.8 11   1.0 2.6 4.1 9
3.0 3.2 5.8 5.8 13   1.1 2.8 4.4 9


Note: The permissible load capacities of the channels are to be respected.

Material:    

- CC-Channel Nut: Steel class, HCP;

- Spring washer: Sheet metal spring steel, rustproof.

SPEED NUT CC HCP
SPEED NUT CC HCP
Code Name Weight Number of pieces
198698 CC 41-M 6 0.03 - Information request
198650 CC 41-M 8 0.03 50 Information request
186284 CC 41-M10 0.03 50 Information request
110015 CC 41-M12 0.06 50 Information request